The difference is beneath the surface.
Showers that don't leak, rot, or grow mold.Pueblo Stone builds custom showers, bathrooms, tile and stone with the preparation and waterproofing that keep them performing for years.
- Licensed contractor
- 30+ years in tile and stone
- Residential and commercial
- Utah County to St. George
What's behind the tile
Tile and grout are not a waterproofing system. A wet-area assembly has to manage water before it reaches the framing, substrate, and subfloor. Here is a simplified shower wall, from the finished surface back to the framing. Tap a layer.
Shower side
The finished surface. It handles wear and gives the shower its look. It is not the waterproofing, so the layers behind it carry that job.
Bonds the tile to the layer behind it. The mortar has to be compatible with the tile, the membrane, and the manufacturer's requirements.
This layer keeps water from reaching the framing. TCNA recognizes bonded waterproof membranes as their own installation category. What matters most is continuity: corners, seams, penetrations, niches, benches, curbs, and drains get added reinforcement and careful detailing where the job calls for it.
Where a wall needs it, we use traditional mortar-float methods to make the surface flat, plumb, and square. It takes more skill and labor. It also fixes the problem in the structure instead of hiding it under thick thinset.
Before anything goes on, we check its condition, flatness, plumb, level, structural suitability, and compatibility with the waterproofing and setting materials.
The part of your home everything else exists to protect from preventable moisture damage.
Inside the wall
Simplified and not to scale. Every project's assembly depends on the materials, the manufacturer requirements, and the conditions on site. See a real job.
A failed shower pan, rebuilt
The homeowner kept seeing mold come back through the grout lines. Cleaning it wasn't solving the problem, so we opened the shower up.
What we found
The pan liner had been installed without a pre-slope, and its weep holes were plugged, so water had nowhere to go. It sat in the pan and soaked the subfloor, which had started to corrode and rot. It was a short time from damaging the flooring in the basement below. We caught it before it got extreme.




Rebuilt from the subfloor up
New plywood, then a pre-slope bed that carries water to the drain, then a waterproofing membrane with the drain and wall base detailed, then the final mortar bed floated to slope. The remodel also includes a new layout and a waterproofed platform for a freestanding tub.





Why the membrane goes under the mortar bed
A popular shortcut right now skips the two-piece drain with weep holes, slopes to the drain, lays a fabric membrane over the slope, and sets tile directly on the membrane. It has weak points. The membrane is exposed while the other work goes on. It can be punctured before the tile is set, and a razor knife can cut it when grout joints are cleaned out before grouting. Damage like that sits hidden under the tile and becomes a liability down the road.
On this job the waterproofing went over the pre-slope, a mortar bed went over the waterproofing, and the tile went on the bed. The bed protects the membrane from everything that comes after.
Then the tile
Only after the layers underneath were done did the tile go on.



The finished bathroom
A walk-in shower, a freestanding tub on its own platform, and a new floor, all built over the same layers.





Photos from the job, shared with the homeowner's permission.
Meet the owner
What clients say about Shawn
Pueblo Stone is Shawn's company, built on more than 30 years in the tile and stone trade. These are reviews his clients left on Google.
Shawn does quality work, always wanting to do things the right way Instead of the fast/easy way. His work looks great, and would definitely use him for another product when I can!
He has a great eye for slab selection, veining, seam placement, edge details, and the little things that can take a project from looking good to looking really high-end.
… There’s a lot more to quality granite and stone work than just cutting and installing it, and Shawn clearly has the experience and knowledge to know how to get the most out of the material.
Shawn is a craftsman you can’t go wrong if you use him he’s excellent
I tell all of my friends about the quality and personal expertise of Shawn.
Where water finds a way in
Water goes after the smallest weakness. These are the places we treat as critical, with extra waterproofing and reinforcement where the installation warrants it.
- Corners and changes of plane
- Seams
- Penetrations
- Niches
- Benches
- Curbs
- Drains
- Plumbing fixtures and fasteners
- Transitions between materials
Slope, drainage, and continuity
In a shower, water has to be directed where it belongs and kept from where it does damage. That means correct slopes, drainage, an unbroken waterproofing layer, and compatible setting materials, with careful detailing around drains, curbs, niches, and benches.
Curbless and barrier-free showers raise the stakes. We pay close attention to elevation changes, drainage, waterproofing continuity, and how the shower meets the finished floor around it.
What we build
Showers and bathrooms
Custom showers, bathroom remodels, shower pans, and curbless and barrier-free showers, with waterproofing systems built in from the start.
Tile and natural stone
Floors, walls, and backsplashes in porcelain, ceramic, and natural stone, from mortar-float installations to detailed tile and stone remodeling.
Stone and solid surface
Fabrication and installation of countertops, vanity tops, shower components, and other custom surfaces, fitted to the tile and waterproofing around them.
Residential and commercial projects, with an emphasis on custom work.
More of Shawn's work
Showers, floors, fireplace walls and mosaic from other Pueblo Stone projects. Tap a photo to see it full size.










GreyStone Granite, a Pueblo Stone service
Stone and quartz repair and sealing
We repair chips, cracks, and fissures in countertops and other stone surfaces, bonding them with epoxy-based products. We also seal natural stone and engineered quartz with a sealer made for the job, to help protect against stains like ink from red and blue pens. This work is offered under the GreyStone Granite name, with the same 30+ years of experience in tile and stone.



- Granite
- Quartzite
- Engineered quartz (resin-based)
- Marble
- Onyx
- Limestone and other natural stone
We don't repair Corian-type solid surface.
Request an estimate
Tell us about your project and we'll talk through the layout, the materials, and what needs to happen behind the finished surface.
- Call or text
- (916) 439-3287
- stonebully@gmail.com
- Service area
- Utah County, Salt Lake City, Heber, and St. George
- Contractor license
- 10887572-5501